Home / All / fogging machine /

OO POWER 12hp fogging machine with high quality and big power

OO POWER 12hp fogging machine with high quality and big power

OO POWER 12hp fogging machine with high quality and big power
Categoriesfogging machine
Power sourcepulse ignitor
Motor power12hp
Start system12V electric
Fuel capacity2L
Pulse thrust7bar
Fogging range10m
Fogging output1.2L/min
Container cap15L
Shell materialstainless
Dry weight12kg
Loading qty200/490
Unit PriceUS $ 89-93 / piece
FOB portningbo/shanghai
Terms of PaymentL/C, D/A, D/P, Western Union, T/T
Update TimeApr 22,2024
Detail Information
OO POWER 12hp fogging machine with high quality and big power

OO POWER fogging machine detail Pictures

Power source
pulse ignitor
Motor power
Start system
12V electric
Fuel capacity
Pulse thrust
7 bar
Fogging range
Fogging output
Container cap
Shell material
Dry weight
Loading qty

Should be aware of the following

1. machine is strictly forbidden in flammable and explosive place.
2. Smoke machine series is made of gasoline as fuel, for flammable, should pay attention to fire. Smoking and smoking is forbidden in the gasoline engine.
3. No ignition igniter check open carburetor.
4. After refueling should fuel tank cap screw. If there is fuel leakage should be cleaned. Move the machine away from the point of service and start up.

5. The machine should be stored before the carburetor in the fuel tank drain. Clean the machine. Stored in ventilation, away from the fire source. Long time should be placed every 30 days to the battery charge 5 hours.

1. Prohibited in the machine working state or just shutdown or add out of fuel.
2. When operating the machine, the high temperature parts do not touch people or animals. As shown in Figure 2, avoid accidental injury. Water forced cooling after the shutdown, this will seriously damage the machine.
3. When working in the field, the working personnel should be operated in the air outlet, and can not follow the direction of the wind. In the indoor operation, staff should be from the inside to the outside of the operating machine, when the door to the door, and shut down the door, to ensure that the body is safe and effective to kill insects and viruses.

1. It is forbidden to use electric arc or acetylene on a machine that has pesticide and gasoline to change or cut. When the fuel tank or the pesticide tank is leaking, please contact the dealer or the professional personage.

2.The safety instructions provided by the pesticide manufacturer should be followed in the process of dealing with the residual pesticides or cleaning the pesticide containers.

3. The use of machine application is completed, should be promptly closed the valve, then turn off the engine. If the engine stops, the valve must be shut down quickly.

1.When the machine is working, no one is allowed to enter the work area.
2. Storage should not allow children to access, so as to avoid accidents.
3. The operator must wear PPE in accordance with the following requirements. (Figure5)
 a.  Must wear work clothes: work clothes must fit, can not prevent action. Can't wear a skirt, wear a coat can't wear scarf tie and jewelry.
 b .  Must take the gloves
 c .  Must wear protective shoes
 d .  Must wear a helmet
 e .  Must wear a gas mask
 f .   Must wear ear plugs (especially long hours).
 Main technical specifications and standards


Mist sprayer

Mist sprayer

specifications and models



Residual liquidL



Power Supply

12v Rechargeable battery

12v Rechargeable battery

Rated spray volumeLh



Gasoline consumptionLh



Nozzle inner diameterMM



fuel tank capacityL




Petrol 92

Petrol 92

work environment



net weightKG



sizeL*W*H  MM



Q1: Where is your Factory located? How can I visit your company?
A1: Our factory is located in Zhejiang, Wuyi City (Nearby Yongkang and Yiwu), about 4 hours driving from ShanghaiAll our clients, from home or abroad, are warmly welcome to take a visit here!
Q2: If we are in Jinhua, Yongkang, Yiwu, can you pick us up to your factory?
A2: Yes, of course, just tell us your address and cellphone number.
Q3: Can I get some Samples?
A3: Yes, sure, we are honored to offer you samples.
Q4: What is your method of sample Transportation?
A4: We deliver goods via International Express like FedEx, UPS, DHL TNT, EMS etc.
Q5: Could you please make OEM for us?
A5: Surely yes. We provide the service of replacing your logo and company name on box.
Q6: What's your Payment method supported?
A6: We accept T/T, L/C, PayPal, Western Union, MoneyGram etc.
Q7: What's your Delivery time?
A7: 2-7 days for sample order, and 3-4 weeks for FCL or LCL order
Q8: How does your factory do regarding Quality Control?
A8: Quality is very important and always be put at the first place. We insist one worker charge 1 process.Having our own Aluminum Diecasting Workshop and Plastic lnjection Molding Workshop allow us easier to control thequality.
Inspections of each step will be done during the production process.
Q9: What about you Warranty?
A9: 12 months.
Q10: I can't find the items what I want in your website, can you Offer the products I need?
A10: Yes, pls tell us the products information, and then we will search for you.
Learn more from our FAQ
You will find yourself working in a true partnership that results in an incredible experience,and an end product that is the best.

Could You Please Make OEM For Us?

Surely yes.We provide the service of replacing your logo and company name on box.


How Long Is The Delivery Time?

1. For Samples : Within 7 days2. For Bulk goods : Within 30 days


How Long Is Warranty ?

Warranty is 12 months .


What's Your Payment Method Supported?

We accept T/T, L/C, Paypal, Western Union, MoneyGram etc.

Request a Quote
Fill all information details to consult with us to get sevices from us
  • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.
Cooperation brand
Keep in touch
Get Insider Information About Exclusive Offers, Events And More!